Home 01Eventful Drops 02Eventful Tablesnew 03
Blog
Guides 05Advertise 06Contact 07Log in ↗
← All posts
GUIDES

Ending a Shared Bike Ride? Look for the QR Code Before You Lock

22 November 2026 · Updated 22 November 2026

Getting off a shared bike is not the same as ending the hire. On Singapore’s shared bicycle network, plan where to park, use the designated space and follow the app’s QR step before walking away.

Eventful diagram: Find a designated zone — Use your shared bicycle operator’s map.; Park and scan — Keep the path clear and scan the nearby parking QR.; Wait for the app to confirm — If it still shows a trip, ask the operator for help..
A quick visual checklist; full conditions are in the guide below.
Photo: Eventful editorial illustration

Find a designated zone in the app

Near the end of the ride, check the map in the bike-sharing app for a designated parking area. LTA identifies yellow boxes and bicycle racks as examples of designated places, but for a shared bicycle use the area shown by your operator rather than assuming every rack accepts it.

Park without blocking the footpath, then scan

Leave the bicycle neatly within the space and keep ramps, entrances and pedestrian paths clear. LTA asks shared-bike users to scan the parking QR code near the designated area. Follow the operator’s exact lock and return sequence and wait for the app to confirm the trip is over.

If you cannot finish the ride, check before leaving

If the QR code is missing, damaged or unreadable, use the operator’s help in the app instead of assuming the trip ended. Keep a record of the location and any confirmation if you need support. Next time, pin the likely parking zone before starting the ride if you are going somewhere unfamiliar.

LTA: active mobility rules and code of conductLTA: illustrated shared-bike parking guide
© 2026 Eventful Media Pte. Ltd.