Home 01Eventful Drops 02Eventful Tablesnew 03
Blog
Guides 05Advertise 06Contact 07Log in ↗
← All posts
GUIDES

Taking a Folding Bike on the MRT? Measure It Folded First

22 November 2026 · Updated 22 November 2026

A folding bike can save a sweaty walk at either end of an MRT trip. But a bike with a hinge is not automatically allowed on board. LTA measures the package after folding, including the bits that stick out.

Eventful diagram: 120 × 70 × 40 cm — Maximum dimensions of the device when folded.; Fold before boarding — Switch off battery-powered devices.; Stand clear of doors — Keep the bike with you and do not block the aisle..
A quick visual checklist; full conditions are in the guide below.
Photo: Eventful editorial illustration

Measure the full folded bike

The limit is 120cm long, 70cm wide and 40cm high. Fold the bike first, then measure to the outermost points. Pay attention to pedals, handles and any accessories that push it past the limit. If the packaging stays too wide, plan for a ride or another vehicle instead.

Fold before boarding and keep it folded

Do not wait until the doors open to work out the latch. LTA requires you to fold the device before boarding; battery-powered devices must be switched off. Keep control of your bike rather than rolling or riding it around the station.

Take the route with the least crowding

Stand where you can hold the bike without blocking doors or aisles, and avoid occupying wheelchair spaces if needed by passengers. If a bus or carriage is packed, give yourself enough time for the next one rather than trying to squeeze in. LTA’s illustrated guide explains boarding and where to position a device.

LTA: mobility devices on public transportLTA: foldable bike and PMD guide
© 2026 Eventful Media Pte. Ltd.